Polypipe 87.5 Deg Triple Socket Junction 160 x 160 x 110mm. Polypipes Below Ground proposition is no

This is a Back Entry Bend for Bottle Gully at a 90 degree angle with a diameter of 100mm, made by th

This is an ABS 32mm Straight Coupling made by Polypipe in Black

This is an ABS 32mm Straight Coupling made by Polypipe in Grey

This is a 40mm Knuckle Bend 90 Degrees made by Polypipe in Black

This is an ABS 40mm Straight Coupling made by Polypipe in Black

This is an ABS 40mm Straight Coupling made by Polypipe in Grey

This is an ABS 40mm Swept Tee 92.5 Degrees made by Polypipe in Black

This is an ABS 40mm Swept Tee 92.5 Degrees made by Polypipe in Grey

This is a ABS 40mm Swept Tee 92.5 Degrees made by Polypipe in White

This is an Aluminium Round Grid for a Bottle Gully made by PolyPipe

This is an aluminium hopper grid made by polypipe.

This is the Square Aluminium rodding point from Polypipe 

Bottom Inlet Bottle Gully + Grid. Polypipes Below Ground proposition is not confined purely to drain

This is the Polypipe Back Inlet Square Hopper. Polypipe's below ground range of drainage carry a

This is a Polypipe Bibtap Wall Flange 20mm x 1/2" 

This is a Polypipe Bibtap Wall Flange 25mm x 3/4"

This is a 110mm Screwed Adjustable Bend from Polypipe in Grey. From 0-90 Degrees