Trend Bevel Trim A=80í X 20mm Dia (Tct Router Cutter Range / Laminate Trimmers)Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.

Shank mounted bearing follows template mounted on board surface.It is advisable that the template is at least 5mm thicker than the cut length of the cutter.Complete with one bearing.Dimensions:Diameter: 22mmCutting Length: 12....

A bevel door undercut/ leading edge router cutter with a long cutting length.For use on inside of doors to allow a tight fit against jamb,making it more accurate and quicker than hand or power planer.Dimensions:Diameter=24.3 mmCut...

Self-guiding triple flute cutter. Extra fine trimming and longer life.For trimming of laminate or plywood overlay. Dimensions:Diameter=12.7 mmCutting Length: 25 mmAngle: 90 degreesShank Diameter: 1/4 inchPlease...

For stationary machines or portable routers mounted in a table at 12000 RPM recommended speed.Dimensions:Diameter=86 mmCutting Radius 1: 40 mmShank Diameter: 1/2 inchPlease note that prices in the Trend Catalogue download,...

Adjustable trimmer will trim and bevel the top and bottom edges of the workpiece. The width of workpiece accommodated can be adjusted with spacers. Trimmer blocks have four wings.Life of cutting edges can be extended with larger 26mm bear...

Adjustable trimmer will trim and bevel the top and bottom edges of the workpiece. The width of workpiece accommodated can be adjusted with spacers. Trimmer blocks have four wings.Life of cutting edges can be extended with larger 26mm bear...

Trend B´Guided Architrave Cutter R16mm (Tct Router Cutter Range / Modern Skirting Mould Cutter)An 8mm shank bearing guided modern skirting board or architrave cutter that can be used in smaller routers. The cutter matches ""off the shelf""...

A bearing guided bead cutter with three equal sized beads.Dimensions:Diameter: 22mmCutting Length: 26mmBearing Diameter: 16mmRebate: 3.5mmCutting Radius: 3mmShank Diameter: 1/2 inchPlease note that prices in th...

For use in a router table only.Take 5-6 passes at repeated depths.For stationary machines - max. 12000 RPM recommended speed.Dimensions:Diameter: 86mmCutting Length: 12.7mmBearing Diameter: 12.7mmAngle: 15 degreesS...

Bearing guided bullnose mould for panel doors and finishing edges to tables.Dimensions:Diameter: 40mmDiameter: 22.8mmCutting Length: 26mmBearing Diameter: 16mmCutting Radius 1: 13mm Cutting Radius 2: 2mmShank Diame...

Two bearings are supplied for an optional lower quirk.Larger bearing removes the quirk. Dimensions:Diameter: 30mmCutting Length: 13mmBearing Diameter: 12.7mm & 16mmCutting Radius: 5mmShank Diameter: 1/2 inchPle...

Two bearings are supplied for an optional lower quirk.Larger bearing removes the quirk. Dimensions:Diameter: 35mmCutting Length: 16mmBearing Diameter: 12.7mm & 16mmCutting Radius: 8mmShank Diameter: 1/2 inchPle...

Trend B/Guided Cham A=25í X 41mm Dia (Tct Router Cutter Range / Chamfer)Supplied with two bearings.Larger bearing removes quirk.Dimensions:Diameter: 41mmCutting Length 1: 5mm Cutting Length 2: 13mmBearing Diameter: 12....

Trend B/Guided Cham A=45í X 31.8mm Dia (Tct Router Cutter Range / Chamfer)Supplied with one bearing.Dimensions:Diameter: 31.8mmCutting Length 1: 12mm Cutting Length 2: 16mmBearing Diameter: 9.5mmAngle: 45 degreesSh...

Trend B/Guided Cham A=45í X 35.1mm Dia (Tct Router Cutter Range / Chamfer)Supplied with one bearing.Dimensions:Diameter: 35.1mmCutting Length 1: 12mm Cutting Length 2: 16mmBearing Diameter: 12.7mmAngle: 45 degreesS...

Trend B/Guided Cham A=45í X 51.5mm Dia (Tct Router Cutter Range / Chamfer)Supplied with one bearing.Dimensions:Diameter: 51.5mmCutting Length 1: 19mm Cutting Length 2: 26mmBearing Diameter: 12.7mmAngle: 45 degreesS...

Self-guiding chamfer/bevel cutter.Bearing follows the board beneath.Dimensions:Diameter=51 mmAngle: 45 degreesShank Diameter: 1/2 inchPlease note that prices in the Trend Catalogue download, if shown below, may differ ...